2 − Names and Functions of Parts

Front panel

11POWER switch and indicator

Press to turn power ON or OFF. The indicator lights when the power is ON.

22Overload (OL) indicators

These light if the level input to this device is too high (overloading with a clipping level of –3 dB or higher).

33Signal (SIG) indicators

These light when a signal (–20 dBu or greater) is detected at an input jack.

44Input LEVEL knobs

Use to adjust the input levels.

55INPUT 1 and 2 activation buttons

Select which of the two inputs (INPUT 1 or 2) to output to the headphones.

66Overload (OL) indicators

These light if the level input to the channel is too high (overloading with a clipping level of –3 dB or higher).

77Signal (SIG) indicators

These light when a signal (–20 dBu or greater) is detected at a direct input for the channel.

88DIR buttons

Press to output the signal from the corresponding

DIRECT INPUTS to the headphones.

99MONO buttons

Make the headphone output function as a monaural output.

0PHONES jacks

Connect headphones.

qPHONES knobs

Adjust the headphones output levels.

TASCAM MH-8 5