Installing the driver for Mac OS X
11Confirm that the US-144MKII is not connected to the computer.
22
33
44Follow the instructions on the screen to conduct the installation.
55Restart the computer and then connect the unit.
Uninstalling the driver
Windows
There are two ways to uninstall the driver as shown below.
•• Using the Installation CD-ROM:
11Follow steps 1 to 4 under “Installing the driver for Windows” (See page 13.)
22At step 5 of the procedure, click “Remove the driver”.
33Follow the instructions on the screen for the remaining procedure.
3 – Installation
•• Using Windows “Add or Remove Programs”
11Open the “Control Panel” from the “Start” menu.
22Double click on “Add or Remove programs”.
33Select
44Follow the instructions on the screen for the remaining procedure.
Mac OS X
11Insert the CD-ROM into the PC and double click “TASCAM US1xx remover” icon.
22Follow the instructions on the screen for the remaining procedure.
Frequently asked installation questions and answers (FAQ)
Windows driver installation
Q:When I connect the unit to a computer, the Windows “Hardware Wizard” appears and I cannot install the driver. Am I making a mistake in the installation procedures?
A:Close the Windows “Hardware Wizard” and disconnect the unit. You must install the driver before connecting this unit.
Insert the
TASCAM