4 –
Sample Clock Source
The clock source can be set to “Automatic” or “Internal.”
•• Automatic (default): If a clock signal is input through the DIGITAL IN jack, it is used. If no signal is input through the DIGITAL IN jack, this unit’s internal clock is used.
•• Internal: This unit’s internal clock is always used.
•• When using digital input, set this to “Automatic.”
Digital Output Format
Set the digital output format to “AES/EBU” or “S/PDIF.”
“ch1 and ch2” and “ch3 and ch4”
This unit sends 4 channels of signals to the computer by USB.
Use these settings to select which of this unit’s inputs signals are sent to each computer input pair.
Select analog inputs or digital inputs.
LINE OUTPUTS and DIGITAL OUTPUT
The computer inputs 4 channels of signals to this unit by USB.
Use these settings to select the signals to be output from this unit’s LINE OUT and DIGITAL OUT jacks.
Set them to “ch1 and ch2” or “ch3 and ch4.”
NOTE
If you want to output Windows Media Player or iTunes, for example, through this unit’s DIGITAL OUT, set the “DIGITAL OUTPUT” to “ch1 and ch2” in the Control Panel.
USB 1.1 Mode Input Selection
This appears only when operating with USB 1.1.
Set the input source to “analog” or “digital.”
18 TASCAM