Tasco 119256CW instruction manual Bold=default Date, Time, Delay

The following table lists all of the menu items, their available settings, and a description of their functions:

Menu Item	Settings	Description/Operation
	(Bold=default)
Date	set year, month,	Press OK and use the UP/DOWN
	and day	keys (to change the setting), then
		press OK again to go to the next
		date parameter and repeat, to
		set the current year, month, and
		day. Press OK after setting the
		day to move on and set the Time
		(next item)
Time	set hour and	Press OK and use the UP/DOWN
	minute	keys (to change the setting) then
		OK again ( to move to the next
		field) to set the current hour (24-
		hr format only, “00”=midnight,
		“12”=noon) and minute.
Delay	set minutes (0-	Selects the length of time that
	10) or seconds	the camera will “wait” until it
	(5-59)	responds to any additional
	Default delay	triggers from the PIR after an
	time= 10 sec.	animal is first detected and
		remains within the sensor’s
		range. During this user set
		“ignore triggers” interval, the
		camera will not capture photos/
		videos. This prevents the card
		from filling up with too many
		redundant images. Settings
		begin with 10 second default
		time. Press OK, set the delay time
		in minutes (if desired), press OK
		and set the delay in seconds.

10