-This appliance is intended for adult use. Ensure that this product is not used by the disabled, children or people unused to its handling.
-This appliance should be stored out of reach of children and/or the disabled.
-Make sure that dust, dirt or other foreign objects do not block the fan grill on the appliance.
-Turn the thermostat control to the minimum (MIN) setting. This does not mean that the iron is switched off permanently.
-Any misuse or failure to follow the instruc- tions for use renders the guarantee and the manufacturer’s liability null and void.
Instructions for use
- Unroll the cable completely before plug- ging it in.
-Connect the appliance to the mains.
-Position the appliance to direct the airflow in the desired direction. (Fig. 3)
-Turn the appliance on, by using the selec- tion knob.
Fan function:
-Select the fan position.
-Check that the thermostat button is set to the maximum.
Heater function:
-Select the heater position.
-Select the desired heating power.
-Check that the thermostat control is set to the temperature required
Carry handle/s:
- This appliance has a handle on the back
to make it easy and convenient to transport. (Fig. 1)
Once you have finished using the ap- pliance:
-Select the minimum position (MIN) using the speed control.
-Stop the appliance, selecting position 0 on the selector control.
-Unplug the appliance from the mains.
Safety thermal protector:
-The appliance has a safety device, which protects the appliance from overheating.
-If the appliance turns itself off and does not switch itself on again, disconnect it from the mains supply, and wait for ap- proximately 5 minutes before reconnecting. If the machine does not start again seek authorised technical assistance.
Wall-mounted option (Fig. 2)
-Remove the adjustable foot from the appliance. To do so, press the two catches which support the swivel pins of the plate with regard to the appliance body.
-Use the adjustable foot as a template for marking the two mounting holes on the wall.
-Insert the plugs (not included) in the wall.
-Place the adjustable foot in the wall
and screw it into the plugs (screws not included).
-Fit the appliance body into the two catches which support the swivel pins of the adjustable foot.
-In the event that the appliance is mounted on a bathroom wall, position it in such a way that the socket, power supply cable, switches or other controls are not within the
Manual CA 2002 Jan 2010.indd 12
22.02.10 15:16:55
