Taurus S2

Your unit may come with a pre-installed hard drive. Before opening such an enclosure, please read the warranty from your vendor carefully, as this could void your warranty.

The aluminium stand does not have to be removed for drive assembly.

For RAID 0 and RAID 1, drives with identical capacities are recommended.

Do not bend the thermal sensor!

User Guide

Chapter 2 - Hard Drive Assembly

1. Remove the four screws at the bottom of the case.

2. Push the inner enclosure out, and remove the outer chassis.

3.Install the first hard drive and mount it with two screws on each side.

4.Attach the thermal probe with the tape provided to the first HDD. Choose a place in between the two drives but without damaging the probe when installing the second drive.

Page 5 / Chapter 2 - HDD Assembly