Taurus S2 | User Guide |
Be careful not to damage any cables or components, and make sure the cables are connected firmly.
The LED indication for HDD1 is referring to the hard drive connected to CN2, where HDD2 is referring to CN1.
5.Install the second hard drive and mount it with two screws on each side.
6.Connect the SATA and power cables to your hard drives. Be careful not to damage any components and confirm that the cables are connected firmly.
7.Slide the inner enclosure back into the outer chassis.
8. Fasten the four screws to finish the assembly.
Page 6 / Chapter 2 - HDD Assembly