9
Model BC12 Important: To the Operator
ON/OFF Power Switch
The power switch is located on the front of the
machine. The power switch controls the power to
the machine. The switch illuminates when placed in
the ON position. Shut the power switch off at night
and whenever the machine will be left unattended.
Figure 3
Switch Rod (Actuator)
The switch rod (actuator) starts the agit ator and
begins a blending cycle. Push the switch rod to
activate a program setting. The machine shuts of f
automatically at the end of the program setting.
Figure 4
Agitator
When the switch rod (actuator) is pushed, the
agitator spins and mixes the product and other
ingredients.
Figure 5
The agitator is manufactured from FDA and NSF
approved, food safe material.
Note: The agitator and shaft must be cleaned
between servingsas product carryover will
occur. (See page 15.)
Pulse/Rinse Switch
The pulse/rinse switch starts the agitator and canbe
used to quickly refresh product or rinse the agitator
between servings. Press and hold the switch to
activate the agitator. The agitator will st op as soon
as the pulse switch is released.
Figure 6