4Model BC12Safety
SDO NOT allow children or untrained
personnel to operate this machine.
SDO NOT operate the unit unless all service
panels and access doors are restrained with
screws.
SAVOID contact with the agitator shaft and
other moving parts.
SMake sure the splash guard is installed prior
to operating the appliance.
SDO NOT disassemble or install parts unless
the control switch is in the “OFF” position.
SAlways use the foot pedal guard, and avoid
accidental use of the foot pedal. When using
the foot pedal, make sure the appliance is
located where accidental contact with the
pedal is not likely. When the blender is not
in use, place the front switch in the “OFF”
position to avoid accidental use of the pedal.
(Note: Some international units are not
equipped with this feature.)
Failure to follow these instructions may result in
severe personal injury from hazardous moving parts.
DO NOT allow the power cord to hang over
the edge of the counter or touch hot surfaces.
Failure to comply may result in an electrical fire or
serious electrical shock.
DO NOT operate this appliance if it
malfunctions or is damaged in any way. Failure to
follow this instruction may result in injury or
component damage.
DO NOT use attachments not
recommended or sold by Taylor. Doing so may
cause fire, electric shock, injury, or equipment
damage.
Make sure the blender is sitting or mounted
solidly on a sturdy surface during operation. Failure
to comply may result in injury or equipment damage.
Some consumers are highly allergicto peanuts,
peanut oil, and peanut dust. In some severe
cases, peanut allergyreactions can cause death.
When blending productwith peanuts, make sure
excess productis cleaned from the agitator shaft
to eliminatethe fear of product carryover.
WARNING!