Set Up Remote Sensor
1.After installing the batteries into the base unit and the remote sensor, place the units close together for best setup connection.
2.Press the “SYNC” button on the back of the base unit to send a transmission signal to the remote sensor. Allow a few minutes for a connection as the 
icon flashes and the temperature digits show dashes. When connected the icon disappears.
icon flashes while transmitting, disappears after connection to remote.
3.After a signal is received, position the remote sensor at an outdoor location within 200 feet of the base unit in a dry, shaded area. Direct sunlight will heat the casing and inflate temperatures readings.
Important: Though the remote is weather resistant, it should be placed away from direct sunlight, rain, snow and should never be submerged in water.
4.Allow at least 6 hours for the remote to analyze weather conditions and report forecast readings. During that time, indoor temperature will update every 30 seconds and appears on the forecast screens. Outdoor temperature and humidity show “-
4
