Mounting the Wind Gauge Sensor(continued)
To mount the Wind Gauge Sensor into the ground:
1.Select a location on an open, flat area of ground with the fewest obstructions possible for best wind accuracy. Choose a spot with soft soil, so as not to damage the mast when going into the ground, but firm enough that the mast will not tip over after going in the ground. No cables, pipes or other objects should be under the ground at this location.
2.Push one end of the mast slightly into the ground. Place a wood block against the other end of the mast. Tap the block with a hammer or mallet against the block until the mast is buried deep enough in the ground to be stable.
3.Attach the remote Wind Gauge Sensor to the mast as previously described.
Ground mount
Antenna |
mount |
11 |
Any location selected should have the fewest obstructions possible for best wind accuracy.
