Taylor 2752 This manual includes information about, Items Required for Installation and Set Up

Thank you for purchasing the Taylor® Digital Wireless Weather Station with Wind Speed Sensor. This state-of-the art measurement instrument is engineered and designed to meet the highest quality standards…to assure you uncompromising accuracy and consistently dependable, convenient performance. This instrument will provide measurements of wind speed & direction, wind chill, heat index, temperature & humidity.

This manual will describe how to set up and operate your Wireless Weather System. In order to optimize the unit's function, please read this instruction manual carefully before use…and keep it handy for future reference.

This manual includes information about:

1.Items and materials needed for installation and set up

2.How to assemble the remote Wind Gauge Sensor

3.How to install the home receiver unit batteries

4.How to select and test a location for the remote Wind Gauge Sensor

5.How to mount the Wind Gauge Sensor

6.How to install the batteries and calibrate the Wind Gauge Sensor

7.How to use and read the data on the home receiver unit

Items Required for Installation and Set Up

Items included in this package:

1.Home Receiver Unit (an indoor unit which displays temperature and other readings)

2.Remote Wind Gauge Sensor (an outdoor sensor unit which transmits wind, temperature & humidity data to the receiver unit)

3.Mounting hardware for the Wind Gauge Sensor (2 “U”-shaped metal plates, 4 sets of Hex screws & nuts).

4.Instruction manual

Additional items needed for installation (not included):

1.A 1” to 1 ¼” diameter MAST and hardware

2.A small Phillips screwdriver (for the battery compartments and wind vane screws)

3.A total of 4 AA batteries (Lithium batteries are recommended, especially for the outdoor Wind Gauge Sensor, as lithium batteries will last longer and thus will not need to be replaced as often as alkaline batteries)

2