Taylor 5754 instruction manual Battery Information and General SET-UP, Weight only Operation

Tap to initialize

BATTERY INFORMATION AND GENERAL SET-UP

1. Select weight mode.	2. Remove plastic strip.	3. Position scale on flat
	Ensure the + sign is up.	surface.

This scale operates on 1 CR2032 lithium battery (installed).

Please remove any plastic strips from the battery compartment before con- tinuing with these instructions.

Some models have a static cling label on the lens to prevent scratching. Please remove before use.

Your scale has been set to measure in pounds and inches

(lb). To change the measurement units to kilograms/centimeters or stone/inches, move the switch on the bottom of the scale to (kg) or (st-lb). When the LCD displays “Lo”, replace the battery with the

“+” sign up.

The scale needs to be initialized before first use or after battery replacement. Press lightly on the scale platform. The display will show a running zeros pattern and automatically turn off. Your scale is now ready for use.

WEIGHT ONLY OPERATION

Your Taylor® Body Fat Scale will operate as a basic weight-reading scale. No special programming steps are required.

Once the scale is initialized, as previously described, you may simply step on the scale to obtain your current weight. For a weight only reading:

1.Place the scale on a flat, hard surface. Carpeted or uneven floors may affect accuracy.

2.Step onto the scale platform and remain still while the scale computes your weight.

3.The display will flash twice when the weight is locked. Your weight is now displayed.

4.The scale will automatically turn off.

2