20 Models C708 & C716Important:To the Operator
050628
AUTO STARTTIMESTANDBYMODEBRUSH CLEAN CYCLEMIX LEVEL AUDIBLEFAULTDESCRIP TIONLOCKOUT HISTORYHEAT CYCLE SUMMARYHEAT CYCLE DATASYSTEM INFORMATIONCURRENT CONDITIONS
Selecting “EXIT FROM MENU” will exit the
Manager’s Menu and the return the control panel
symbols to normal operation.
The SERVING COUNTER screen is used to check
or reset the number of servings dispensed from the
machine. The SERVING COUNTER will
automatically reset to zero when the machine is
brush cleaned.
SERVINGSCOUNTER
0
>Next
Reset the SERVING COUNTER by touching the
SEL symbol to advance to the next screen. Touch
the UP arrow symbolt o movet hearrow (>) t o YES
and touch the SEL symbol. The servings counter will
reset to zero and exit back to the Manager’s Menu.
RESETDRAW COUNTER
Yes
>No
The SET CLOCK option allows the Manager to
adjust the control clock date and time. The date and
time may only be changed after the freezer has
been manually cleaned but before it has been
placed in the AUTO or STANDBY mode. The
following message will be displayed if the SET
CLOCK option is selected when the machine is not
in a brush clean state.
SETCLOCK
12:01 2/21/2004
NOCHANGES ALLOWED
PressAny Key
To change the date or time, select the SET CLOCK
option in the menu. Touch the UP arrow symbol to
advance the arrow from Exit to Change, then touch
the SEL symbol to select the Change option.
SETCLOCK
12:01 2/21/2004
Change
>Exit
Change the time by touching the UP arrow with the
cursor under the hour position. Move the cursor to
the minutes position by touching the SEL symbol.
Once the correct minutes are entered, touch the
SEL symbol to advance the cursor to the month.
SETCLOCK
12:01 2/21/2004
>Exit
Enter the correct month, day, and year. Then touch
the SEL symbol to advance to the DAYLIGHT
SAVING TIME screen.
DAYLIGHTSAVING TIME
ENABLED
> Enable
Disable
The Daylight Saving feature, when enabled, will
automatically adjust the control clock for daylight
saving time. To disable the Daylight Saving Time
feature, touch the DOWN arrow to move the arrow
to “Disable”. Then touch the SEL symbol to save the
new setting.