PRESETS
-When storing a preset in bank mode, only the modified parameters will be stored. There is no “overwrite” function.
-The 2x9 presets in Bank mode are completely separate from the 9 presets in Preset mode.
No presets will be deleted when switching back and forth between the two modes.
When switching to a new bank NOVA Modulator 
is automatically bypassed and preset #1 (PRESET button) is selected, ready to be activated when you press ON/OFF
Limiting the Number of Presets
As explained in the previous paragraphs, you can cycle through presets in different ways:
•Either by pressing the PRESET button repeatedly or
•By hitting TAP TEMPO once, followed by the ON/OFF switch.
However, you may only need e.g. four presets for a show. In that case, having to scroll through all of the nine presets to find the one you need would be
annoying. Therefore you have the option of limiting the available preset range – e.g. to four presets.
Example:
Let’s say you want to use only presets 1, 2, 3 and 4. To do so, set up the pedal as follows:
•Press and hold the MANUAL button for approximately 500 ms. The unit is now in Calibration mode.
•Turn the DEPTH knob of Engine B to select the upper limit of the preset range.
In this case, select “4”.
•Now turn the DEPTH knob of Engine “A” to select the lower limit of the preset range.
Let us say that you play in two different bands.
With one band you want to use presets 1 to 4; 
with your other band, it’s presets 5 to 8. As the NOVA pedal easily holds eight presets, all you have to do is change the range for each session.
30
