TC electronic SDN BHD x32 user manual Adat Routing, SRC Sample Rate Conversion

OPERATION

TOS IN 5/6

digitalkonnekt x32

FORMAT CONVERTER PATCHBAY FIREWIRE IO

aes/spdif/tos in				aes+spdif+tos		adat	mon
	TOS SPDIF SRC	1/2	1-2 3-4 5-6 7-8				1-2
		3/4					3-4
		5/6			adat		5-6
FRONT		7/8			1-8		7-8
		LOCK
aes/spdif clock master		SIG

adat in				aes+spdif+tos		adat	mon
	NS	1/2	1-2 3-4 5-6 7-8				1-2
	DS	3/4					3-4
		5/6					5-6
	SRC				adat
		7/8			1-8		7-8

LOCK

SIG

firewire in			aes+spdif+tos		adat	mon
1-8	1/2	1-2 3-4 5-6 7-8				1-2
9-16	3/4					3-4
	5/6					5-6
				adat
	7/8			1-8		7-8

LOCK

SIG

master clock

clock rate firewire 44.1k

	48k
WCK in
	x2
adat	x4
	SEL
aes		INT
/spdif

hold to select input

setup/util

192kHz fs

dual wire XLR

AES pro out

input signal

monitor LEDs

￿ security lock device

HOLD TO UN-LOCK

scenes

1

2

3

4

HOLD TO STORE SCENE

monitor

+phones

adat in				aes+spdif+tos		adat	mon
	NS	1/2	1-2 3-4 5-6 7-8				1-2
	DS	3/4					3-4
		5/6					5-6
	SRC				adat
		7/8			1-8		7-8

LOCK

SIG

f

ADAT Routing

The four ADAT channel pairs can be routed to any pair of AES+SPDIF+TOS channels and to the eight ADAT channels simultaneously as well.

Example 2

In the example below the following is selected:

ADAT In

This section routes the signal present on the ADAT in connection. The signal can be routed to AES/EBU, SPDIF, Toslink and ADAT outputs and any pair of channels can also be routed to monitor out.

NS & DS - (Normal and Double Sample Rate) Using these switches you can alternate between using normal or double sample rate for the ADAT format.

At normal sample rate, 44.1 or 48 kHz, up to eight channels can be sent on a single lightpipe cable. Use MAIN 1-2 connections on the rear panel.

MAIN	IN	96k	ADAT	MAIN	OUT	96k
1-2		3-4	TOS	1-2		3-4

Normal sample rate

ADAT ch. 1-2 is sent to AES+SPDIF+TOS ch. 1-2 ADAT ch. 3-4 is sent to AES+SPDIF+TOS ch. 3-4 ADAT ch. 5-6 is sent to AES+SPDIF+TOS ch. 5-6 ADAT ch. 7-8 is sent to AES+SPDIF+TOS ch. 7-8

All ADAT channels are sent to ADAT out.

ADAT channels 1-2 are sent to the analog monitor and headphones outputs.

adat in				aes+spdif+tos		adat	mon
	NS	1/2	1-2 3-4 5-6 7-8				1-2
	DS	3/4					3-4
		5/6					5-6
	SRC				adat
		7/8			1-8		7-8

LOCK

SIG

At double sample rate, 88.2 or 96kHz, four channels per lightpipe connection can be sent. To facilitate eight channels, two lightpipe cables for inputs and 2 lightpipe cables for outputs must be used.

SRC - (Sample Rate Conversion)

Press to activate sample rate conversion on all ADAT input channels. This will deselect any previously selected sample rate conversion.

8