83-493-001 Rev. K
10

TB1

L1
COM
L2
230 VAC
115 VAC

TB

1

L1
COM
L2
115-2 30 VAC
Figure 3-1 Input AC Power Connection NON-PFC Version
Figure 3-2 Input AC Power Connection, PFC Version
3.4 POWER CORD SPECIFICATION:
Use wire with minimum .064 inches (1.6mm) diameter and 600 V insulation.
WARNING: 102A, 152A AND 202A PFC Models are only available with 220 VAC
Nominal. For 152A Models Suffix 110 at 110-120 VAC must be operated with the
internal fuses F1 and F2 (on the Inverter Board) replaced by copper bus provided
with the supply. Use external 30A UL/VDC Approved Fuse/Circuit Breaker.
NOTE: For Application at less than 10 Hz, please see section 5.7.