TDK iFA Series

Advance Data Sheet: Maxeta

iFA Series

iFA Advance Datasheet 6/6/2005

℡

(877) 498

0099

9/18

Thermal Performance:

iFA24021A280V- 000 through - 026: 28V, 21.5A, 602W Output

Maximum output current vs. ambient temperature at

nominal input voltage for airflow rates natural

convection 0.3 m/s (60lfm) to 3.0m/s (600lfm) with

airflow from Vout(-) pins to Vout(+) pins.

Maximum output current vs. ambient temperature at

nominal input voltage for airflow rates natural

convection 0.3m/s (60lfm) to 3.0m/s (600lfm) with

airflow from Vout(+) pins to Vout(-) pins.

Thermal measurement location – top view

The thermal curves provided are based upon measurements made in TDK Innoveta’s experimental test setup that is

described in the Thermal Management section. Due to the large number of variables in system design, TDK Innoveta

recommends that the user verify the module’s thermal performance in the end application. The critical component should

be thermo- coupled and monitored, and should not exceed the temperature limit specified in the derating curve above. It

is critical that the thermocouple be mounted in a manner that gives direct thermal contact otherwise significant

measurement errors may result.

INPUT

OUTPUT

Best

Orientation

Airflow

Worst Orientation Airflow

Thermal

Measurement

Location

25 35 45 55 65 75 85 95 105 115 125

Ambient Temperature (C)

Output C urre nt (A )

NC 0.3 m/s (60 LFM) 0.5 m/s (100 LFM) 1.0 m/s (200 LFM) 1.5 m/s (300 LFM)

2.0 m/s (400 LFM) 3.0 m/s (600 LFM) Max IMS Temp

25 35 45 55 65 75 85 95 105 115

Ambient Temperature (C)

Output Cu rrent (A )

NC 0.3 m/s (60 LFM) 0.5 m/s (100 LFM) 1.0 m/s (200 LFM) 1.5 m/s (300 LFM)

2.0 m/s (400 LFM) 3.0 m/s (600 LFM) Max IMS Temp