Teac A-H300mkII Remote Control Unit, System Connection, Battery Installation, Reference 300mk@

Remote Control Unit

The amplifier and Reference 300mk@ series connected by remote control cords can be operated by the provided remote control unit.

When operating the remote control unit, point it towards the REMOTE SENSOR on the front panel of the A-H300mk@.

<Even if the remote control unit is operated within the effective range, remote control operation may be impossible if there are any obstacles between the unit and the remote control.

<If the remote control unit is operated near other appliances which generate infrared rays, or if other remote control devices using infrared rays are used near the unit, it may operate incorrectly. Conversely, the other appliances may operate incorrectly.

Battery Installation

1Remove the battery compartment cover.

2Insert two “AAA” (R03, UM-4) dry batteries. Make sure that the batteries are inserted with their positive “+” and negative “_” poles positioned correctly.

3Close the cover.

Battery Replacement

If the distance required between the remote control unit and main unit decreases, the batteries are exhausted. In this case replace the batteries with new ones.

Precautions concerning batteries

<Be sure to insert the batteries with correct positive “+” and negative “_” polarities.

<Use batteries of the same type. Never use different types of batteries together.

<Rechargeable and non-rechargeable batteries can be used. Refer to the precautions on their labels.

<When the remote control unit is not to be used for a long time (more than a month), remove the batteries from the remote control unit to prevent them from leaking. If they leak, wipe away the liquid inside the battery compartment and replace the batteries with new ones.

<Do not heat or disassemble batteries and never dispose of old batteries by throwing them in a fire.

System Connection

Reference 300mk@

If you have TEAC Reference 300mk@ series, convenient system control operations and AI direct play functions are possible.

<By pressing the STANDBY/ON button of A-H300mk@, you can switch ON/standby all the unit connected by remote control cords.

<When you press the PLAY button of a source, the INPUT SELECTOR of A-H300mk@is set to the source automatically.

<The source you select by the INPUT SELECTOR of A-H300mk@will be played automatically.

<When you turn on the system, the source that was selected last time will start playback automatically.

<You can use the system remote control unit to operate all the unit connected by remote control cords.

Connect the REMOTE CONTROL jack (A or B) of each component by remote control cords.

A-H300mk@

Reference300mk@

REMOTE

CONTROL

Reference300mk@

REMOTE

CONTROL

Dubbing

When you intend to dub a cassette tape using 2 sets of R- H300mk@, don’t connect the remote control cords to the second deck. Please use the buttons on the front panel.

ENGLISH

5