Teac AG-790 owner manual APOWER switch, English

APOWER switch

Press this switch to turn the unit on or off.

The equipment draws nominal non-operating power from the AC outlet with its POWER switch in the OFF position.

BSTANDBY indicator

This indicator lights when the unit is in the standby mode.

In the standby mode, press the POWER button of the remote control unit or the Input buttons of the main unit to turn the unit on.

When the unit is turned on, the indicator goes off.

CREMOTE SENSOR

When operating the remote control unit, point it towards the

REMOTE SENSOR.

DSPEAKERS indicator

This indicator lights when the SPEAKERS button (A or B) is set to on.

EDisplay

When the unit is on, the current status of the unit is displayed.

FMUTING indicator

This indicator blinks during the muting.

GLOUDNESS indicator

This indicator lights when the LOUDNESS button is set to on.

HVOLUME/JOG

Turn this knob (or press the VOLUME buttons of the remote control unit) to adjust the volume.

IBALANCE button

Press this button and turn the VOLUME/JOG dial to adjust.

JTREBLE button

Press this button and turn the VOLUME/JOG dial to adjust.

KBASS button

Press this button and turn the VOLUME/JOG dial to adjust.

LSLEEP button

Use this button to set sleep timer.

MLOUDNESS button

Use this button to compensate for the loss of bass at low volumes.

NINPUT

(CD, PHONO, TUNER, TAPE MONITOR, VIDEO/AUX) Used to select a function.

When the unit is in the standby mode, press any one of these buttons to turn the unit on.

OTUNING/PRESET buttons

In the manual tuning mode, use these buttons to tune in a station.

In the preset tuning mode, use these buttons to select a preset channel.

PMEMORY button

Use this button to store preset channels into memory.

QFM MODE button

Use this button to select stereo or monaural.

RBAND button

Use this button to select FM or AM.

STUNING MODE button

Use this button to select the manual tuning mode or the preset tuning mode.

TPHONES jack

For private listening, insert the headphones plug into this jack, and adjust the volume by turning the VOLUME knob.

USPEAKERS buttons

Use these buttons to turn on or off the speakers. on : Sound is output from the speakers.

off : No sound is output from the speakers.

aPOWER (standby/on) button

When the power switch of the main unit is depressed, use this button to turn the unit on or standby.

bMEMORY SCAN button

Use this button to scan preset channels.

cOperation buttons for TEAC’s cassette tape deck and CD player

Use these buttons to operate TEAC components with mark.

dMUTING button

Use this button to mute the sound.

eINPUT

(CD, PHONO, TUNER, TAPE MONITOR, VIDEO/AUX) Used to select a function.

Note:

To simplify explanations, instructions in this manual refer to the names of the buttons on the front panel only. Associated controls on the remote control will also operate similarly.

ENGLISH

9