![Basic Operation](/images/new-backgrounds/9988/998819x1.webp)
Basic Operation
1 |
| 2 |
| 3 |
1Press the POWER switch. The unit is turned on.
<When the unit is turned on, the MUTING indicator lights momentarily. This is not a malfunction.
<When the unit is in the standby mode and the standby indicator is lit, press the POWER button of the remote control unit or any of the Input buttons of the main unit (TUNER, PHONO, CD, TAPE MONITOR or VIDEO/AUX) to turn the unit on.
2Select a source by pressing the corresponding Input button.
Tape Monitor
Press the TAPE MONITOR button to turn on or off the tape monitor function. When the tape monitor is on, the “TAPE
MON ” indicator lights on the display.
To listen to the TAPE, turn the tape monitor function ON using the TAPE MONITOR button.
To listen to a source other than TAPE
If the tape monitor function is ON (“TAPE MON ” indicator is lit), press the TAPE MONITOR button to turn it off.
3Play the source, and gradually turn up the volume to the required level by turning the VOLUME knob.
Recording
1.Select the source to be recorded using the corresponding Input button.
2. Start recording.
<If a
10