Teac AG-H380 Basic Operation, BC A AHow to turn the unit on or off, BHow to select source

Basic Operation (1)

BC

A

AHow to turn the unit on or off

Press the POWER switch to turn the unit on or off.

When you use the system control function, set this switch on, and turn the system on/standby using the remote control unit.

Standby/On indicator

The Standby/On indicator turns blue when the unit is turned on.

<When you turn on the system, the source that was selected last time will start playback automatically.

<The clock setting will not be saved whern the POWER turns off.

BHow to select source

Every time the SOURCE button is pressed, the mode is changed as follows:

TUNER USB/iPod PHONO

CD AUX2 AUX1

Or press the TUNER, USB/iPod, PHONO, AUX 1/2 or CD button on the remote control unit to select the source directly.

CAdjust the volume

To protect speakers from a sudden high-level signal, gradually turn up the volume to the required level with the VOLUME knob.

D Muting
To cut the sound temporarily, press the MUTING button. To	ENGLISH
cancel muting, press the MUTING button again or change the
volume setting.

EDimmer

Press the DIMMER button to dim the display.

Press the button again to cancel the dimmer function.

<This function will be cancelled when the unit is turned off.

FListening through headphones

Insert the headphone plug into the PHONES jack, and adjust the volume. The sound from speakers and subwoofer will be cut off.

13