Setting the Clock
The clock setting of this unit is automatically adjusted according to the CLOCK TIME data of an RDS broadcasting.
If you adjust the clock manually, follow the following steps.
1Press the TIME SET button.
Each time the TIME SET button is pressed, the mode is changed as follows.
Current Time
On Time
O Time
Source select
<The unit uses the
<When no action is taken for 1 minute, the time adjust mode will be cancelled.
<Press the stop button (H) to cancel the time setting.
2Press the ˙ or ¥ button to set the current hour.
3Press the ENTER button.
The “minute” value blinks.
4Press the ˙ or ¥ button to set the current minute.
5Press the ENTER button.
ENGLISH
The clock starts from 00 seconds.
<The clock setting will not be saved when the POWER turns off.
27