6 − After recording

Erasing

Erasing tracks

This operation erases the specified track and all subsequent tracks from a recorded CD-RW disc.

NOTE

Rotate the MULTI JOG dial or press the MENU (+/-)key to change the track numbers you desire to erase.

Once this operation has started, the STOP key cannot be used to cancel it. Please check the track range to be deleted first.

1.While stopped, press the ERASE/DEL key on the front panel or the ERASE key on the remote control. Select the ERASE TRACK? rotating the MULTI JOG dial or pressing the MENU (+/-)keys on the remote control.

To cancel the operation at this point, press theERASE/DEL or the ERASE key again.2.Push the MULTI JOG dial or press the ENTER key to enter the function.

The display shows Erase XX-XX(the number of the first track and last track to be erased).

To cancel the operation at this point, press the ERASE/DEL or the ERASE key again.

3.Push the MULTI JOG dial or press the ENTER key to operate the function.

The display shows Sure?

To cancel the operation at this point, press the

STOP key.

4.Push the MULTI JOG dial or press the ENTER key again to proceed the operation.

The display shows Erase flashing and the remain- ing time. The unit starts counting down from a time shown on the display.

5.When the tracks have been erased, Complete will appears on the display.

Erasing a whole disc

When you want to erase a whole disc (all the tracks on a disc), follow the procedure below:

NOTE

Once the operation is proceeded, the STOP key cannot function. Please confirm before the opera- tion.

1.While stopped, press the ERASE/DEL key on the front panel or the ERASE key on the remote control. Select the ERASE DISC? by rotating the MULTI JOG dial or pressing the MENU (+/-)keys on the remote control.

To cancel the operation at this point, press the

ERASE/DEL or the ERASE key again.

2.Push the MULTI JOG dial or press the ENTER key to enter the function. The display shows Sure?

To cancel the operation at this point, press the

STOP key.

3.Push the MULTI JOG dial or press the ENTER key again to proceed the operation.

The display shows Erase flashing and the remain- ing time. The unit starts counting down from a time shown on the display.

4.When the disc has been erased, Complete ap- pears then Blank Disc will appear on the dis- play.

Refreshing a disc

Refreshing the disc makes a disc usable again. This operation destroys all data on the disc.

1.Load the disc, and the unit in stop mode, press the ERASE/DEL key on the front panel or the ERASE key on the remote control. Select the RE- FRESH? rotating the MULTI JOG dial or pressing the MENU (+/-)keys on the remote control.

To cancel the operation at this point, press the

ERASE/DEL or the ERASE key again.

2.Push the MULTI JOG dial or press the ENTER key on the remote control to enter the function. The display shows Sure?

To cancel the operation at this point, press the STOP key.

3.Push the MULTI JOG dial or press the ENTER key again to proceed the operation.

The display shows Erase flashing and the remain- ing time. The unit starts counting down from a time shown on the display.

4.When the disc has been refreshed, Complete appears then Blank disc will appear on the display.

32 TASCAM CD-RW901