Teac CD-RW901 Title input operation, Disc title input, Track title input, ªSelect the type of character for input, ªInput procedure, ªTo insert characters

Titles can be given to the disc and the tracks on the disc, using the TEXT EDIT option on the TEXT sub- menu.

7 − Titling

NOTE

After a new title is selected and entered on the disc, TOC will light up on the display. If the power is turned off, the TOC has not been recorded on the disc and the titles will not have be added. You must finalize the disc to save the titles.

Title input operation

Follow the guidelines below to input titles on the screen. Operate them when in the text edit mode.

It is more efficient to connect a keyboard for title input ( see “Title input by keyboard” on page 34).

ªSelect the type of character for input

Press the DISPLAY key on the unit or the remote control to select from two different types of charac- ters.

Lower case letters/code: no indicationCapital letters/code: CAPS

ªInput procedure

Rotate the MULTI JOG dial or the MENU (+/-)keys on the remote control to get the desired characters on the display.

Push the MULTI JOG dial or press the ENTER key on the remote control to enter.

ªTo insert characters

Move the cursor to the location where you wish to insert a character, and press the FINALIZE/INS key on the front panel or the FINALIZE key on the remote control.

ªTo change a character

Place the cursor on the character to be changed, then input the desired character.

NOTE

As with the TEXT menu, if you attempt to eject the disc without writing the TOC to the disc, the display will show Sure? Text!. If you want to eject the disc without performing a TOC write, press the OPEN/ CLOSE key while “Sure Text!” is shown on the dis- play. The text that have been edited or entered will be abandoned.

ªTo move the cursor position

Use the ∆/˙ key and the ˚/¥ key on the front panel, or the SEARCH key on the remote control.

The disc or track title on a finalized disc cannot be edited. Unfinalizing (CD-RW only) is needed in this case to use the title input function.

ªTo delete characters

Place the cursor on the character, then press the ERASE/DEL key on the front panel, or the ERASE key on the remote control.

Disc title input

1.While stopped, select the TEXT EDIT option in the TEXT sub-menu (see “Operation basic” on page 15). Text> Disc will appear.

2.Press the MULTI JOG dial or the MENU (+/-)key on the remote control.

Now, you can input or edit the disc title following the guidelines above.

3.Press the MENU key to enter.

If you want to cancel, press the STOP key.

Track title input

1.While stopped, select the TEXT EDIT option in the TEXT sub-menu (see “Operation basic” on page 16).

2.Rotate the MULTI JOG dial or repeatedly press the MENU (+/-)keys on the remote control to select the track number you wish to title.