Teac CR-H255 owner manual Programmed Playback, To check the programmed order

Programmed Playback

.// y

CLEAR PROGRAM

<This function allows you to program up to 32 tracks or files for playback in any desired order.

1Press the PROGRAM button in the stop mode.

2Select the desired track or file by pressing the

. or / button and press the PROGRAM button to enter.

Repeat this step to store other tracks.

<If you attempt to program more than 32 tracks or files, ‘P-FULL’ is displayed and no more can be programmed.

3 Press the PLAY button (y) to start programmed playback.

<The programmed contents for audio CDs are not lost even if the unit is turned off, but they are lost when the disc tray is opened or the USB device is disconnected.

<The unit will stop automatically when the playback of all the programmed contents is finished, and the program contents disappears from the display, but they are not lost.

<To start program playback again, press the PROGRAM button and the PLAY button (y).

To check the programmed order

Press the PROGRAM button repeatedly in the stop mode. The track/file number and program number will be shown on the display.

20