Teac DA-88 manual SY-88 Menu Functions Software Version, Off, Leap, Psp

DA-88 quick ref.doc
10/14/97	7:27 PM

SY-88 MENU FUNCTIONS Software Version 4.01

These items are available after you enter the SY-88 Menu System by switching display to TC and pressing ￿ and ￿ simultaneously. Once in the Menu System, pressing DISPLAY will scroll forward through the Menu Items. Holding DISPLAY and pressing ￿ will scroll back to the previous Menu items, Holding DISPLAY and pressing ￿ will exit the Menu system.

		Display				Description
Item		Choices						Setting	Dip
No	Item			Item					Sw
		Default				Default
1		Select DA-88 Time Base		Select operating Frame rate: 30 ndF, 29 ndF, 29 dF, 25 F and 24 F
2	t	Display Only		Displays Frame Rate of time code recorded on tape
3	t.out	tc	Abs	ABS to TC conversion		off		on
The following menus are available DA-88 SYS Ver 3.10 or later, and SY-88 Ver 4.01 S1-#2 Must be in the down position for 9-pin control
4	ChS	rEch	FrEE	Chase Mode		rechase		free	S1 #3
5	vSync	OFF	on	Video Sync		Off		On	S1 #7
6	tCt.	AnLG	dGEL	Time code timing		analog		digital	S1 #5
7	rEnt.	EnA	dSA	9-pin Remote control		Enable		Disable
8	d.	Device Type	(See table 2)	9 pin device Ack.				(See Table 2)	S3 #1,2,3
9	rcdLy.	Record delay (See Manual)		Record Delay			See Manual for settings
10	trKArm.	on	oFF	Track arming		enable		disable	S3 #7
11	tm.	Track Mapping (See Table 3)		Track Mapping		See Table 3 for settings			S3 #4&5
12	Shtmute	0	1	Shuttle Mute		don’t mute		mute
13	FASt.	8	100	Fast wind speed		X8		X100	S3 #6
14	CutLy.	StP	StL	Cue up tally		Stop		Still	S3 #8
15	morE…	0	1	More Menu		No		Yes
The following Menu items are available only when item 15, more is set to 1
16	v.	Example 4.01. 3		Software Version (Display only)
17	rEchwd.	1	2	Rechase Window		1 second		2 seconds	S1 #4
18	vsy.	FrEE	rESy	Video re-Sync mode		Free		Re-Sync
19	LtC.	LEAP	5F	LTC mode		leap		5 frames	S1 #8
20	tCrEc	0	1	9-pin TC record enable		Disable		Enable
21	PSP.	mute	on	Pgm Spd Play mode		mute		don’t mute
22	rESEt				Reset to factory defaults
23	rEAd			Read current hardware switch settings

Page 3

© TEAC America, Inc., 1997 All rights reserved.