Timer
ALARM1/ALARM2 .//
<The unit can be programmed to turn on at a specified time. The unit will turn off 60 minutes after reaching the specified time.
<Adjust the clock before setting the timer (see page 14).
Setting the timer
1Press and hold the ALARM button (1 or 2) for more than 3 seconds.
The clock blinks and the ALARM
indicator ( 
or 
) appears on the display.
<If no button is pressed for about 1 minute, the timer setting mode will be canceled.
2Press the TUNING/SKIP button (.) to set the start hour, and press the TUNING/SKIP button (/) to set the start minute.
3Select a source (iPod or RADIO) using the WAKE button.
<You cannot select “AUX”.
4Set the volume or select alarm high or low using the TUNING/SKIP buttons (.//).
The volume for timer operation is adjustable from 10 to 40.
5Press the ALARM button (1 or 2) to enter the timer setting.
Setting the timer is now completed.
22
