Using the
Using the Sleep Timer
With the sleep timer, you can set the
SLEEP
Press the [SLEEP] button repeat- edly to select the required sleep time.
With the [SLEEP] button, you can set the sleep time from 90 to 10 minutes in 10 minute steps.
Use the Previous and Next [ ]/[ ] buttons to set the sleep time in 1 minute steps from 99 to 1.
SLEEP indicator
When the sleep timer has been set, the SLEEP indicator appears on the display, as shown. The sleep time appears on the display for about 8 seconds, then the pre- vious display reappears.
Checking the Remaining Sleep Time
To check the remaining sleep time, press the [SLEEP] button.
Note that if you press the [SLEEP] button while the sleep time is being displayed, you’ll shorten the sleep time by 10 minutes.
Canceling the Sleep Timer
To cancel the sleep timer, press the [SLEEP] button repeatedly until “Sleep Off” appears.