Onkyo CBX-300 instruction manual Using the Timers—Continued, Programming the Timers, En-43, Notes

Using the Timers—Continued

Programming the Timers

Notes:

•You must set the clock before you can program the timers.

•Before programming a timer to turn on the radio, you must preset the station you want to use. (See pages 33 and 34.)

•If you don’t operate any buttons for 60 seconds while programming a timer, the procedure will be cancelled and the previous display will reappear.

STANDBY/ON

Number buttons

/ TIMER

ENTER

3 Use the Previous and Next [ ]/

[ ] buttons to select the source, and then press [ENTER].

You can select the following sources: FM, AM, LINE, CD, or iPod.

If you selected LINE, CD, or iPod, pro- ceed to step 5.

4	If you selected FM or AM, use the
	Previous and Next [	]/[	] but-
	tons to select the radio preset, and
	then press [ENTER].

1

2

Press the [TIMER] button repeat- edly to select timer 1, 2, 3, or 4, and then press [ENTER].

If “Clock” appears first, you need to set the clock (see pages 19 and 40).

Use the Previous and Next [ ]/ [ ] buttons to select Snooze On or Snooze Off, and then press [ENTER].

5	Use the Previous and Next [		]/
	[	] buttons to select Once or
	Every, and then press [ENTER].

Select Once for one-off operation. Select Every to perform the same operation every week.

If you selected Every, proceed to step 7.

6	If you selected Once, use the Pre-
	vious and Next [	]/[	] but-

tons to select the day, and then press [ENTER].

You can select: SUN, MON, TUE, WED,

THU, FRI, or SAT.

Proceed to step 9.

En-43