Teac K1200 owner manual

Check the volume control position of your ComSystem prior to use. If in doubt about the correct setting, turn the volume control counter-clockwise to a minimal level prior to turning on ignition to avoid excessively loud volume when the motorcycle ignition is turned on.

Set your ComSystem to a volume level which allows you at all times to hear traffic noises and the signals of other road-users (especially police and emergency services). Volume settings which prevent this are dangerous to you and those around you. Moreover, the influence of high noise levels can damage your hearing.

Only use the communications features of the ComSystem when the traffic situation allows without danger. Observe all local regulations with respect to helmet installed audio systems.

While driving, do not conduct any conversations by radio or telephone which will distract you from events on the road. In these cases, you should stop the motorcycle and only drive on after the conversation is concluded.

3