Teac K1200 owner manual Rider / Passenger Intercom, Operation, Requirement

Rider / Passenger Intercom

Operation

The ComSystem intercom is a voice activated system that allows seamless communication between rider and passenger. The ComSystem is operational when the motorcycle ignition switch is turned “on”. The system will not function (nor can you hear music through the helmet headsets) with the ignition “off” (though the radio may still work through the fairing speakers).

Requirement

•The ComSystem will function properly only if the rider and passenger are wearing helmets fitted with BMW headsets or headsets compat- ible with the BMW system.

Operation

•Set the intercom volume control ➌ to 50% of range to ensure that audio is not excessively loud when system is turned-on. You may later adjust the volume to the desired level, turning clockwise to increase volume. (There is no automatic intercom volume increase function as with the BMW radio, as the perceived intercom volume does not change much with speed changes due to wearing a helmet)

•Turn “on” the ignition switch, which activates the ComSystem power.

•Adjust the VOX sensitivity knob ➎ to the desired level that will allow the intercom to activate upon speaking, but not falsely activate from outside ambient / wind noise. Turn clockwise for greater sensitivity, counterclockwise for less sensitivity.

7