Basic Operation (2)
Random play
In stop or play mode, press the random play button (½) on the remote control. The screen will display an “R” character, indicating that it is in random play mode.
To cancel this function during random play mode, press the random play button (½) or the stop button (8) once.
Display brightness adjustment
Press the time display button (DISP) on the remote control to adjust the brightness of characters in the display based on the brightness of the surrounding environment.
If you hold down the time display button (DISP) for 2 or 3 seconds, the display brightness will toggle through “HIGH, LOW and OFF”.
oo The unit automatically defaults to “HIGH” brightness at startup.
USB control
1Press the POWER button on the front panel to turn the unit on, and then press the signal input selector button (INPUT) on the front panel or the signal input selector button (kor j) on the remote control to select the USB input signal.
2Connect one end of a USB cable to the unit and the other end to your computer. The
oo The supported operation system is Windows 7.
3Run Windows Media Player on your computer to play music.
4Press the relevant buttons on the front panel or remote control to operate Windows Media Player on your computer.
The function of each button is as shown below:
.: previous track
/: next track
G/J: play/pause
H: stop
12
Troubleshooting
If you experience any problems with the unit, please take a moment to look through this chart before asking for repairs. If you still have a problem, contact your dealer or TEAC customer service/technical support (stated on the back cover).
No power
eCheck the connection to the AC outlet. Check and make sure the AC source is not a switched outlet and that, if it is, the switch is turned on. Make sure there is power to the AC outlet by plugging another item such as a lamp or fan into the outlet.
Remote control doesn't work.
ePress the POWER button of the main unit to turn it on.
eIf the batteries are dead, change the batteries.
eWithin the specified range of 10 m, point the remote control directly at the unit's front panel.
eClear any obstacle between the remote control and the main unit.
No sound
eCheck the connection to the amplifier.
eCheck the operation of the amplifier.
eDepending on the disc, etc. it may not be possible to play back
eYou cannot play back unfinalized
Will not play
eLoad a disc with the playback side facing down.
eIf the disc is dirty, clean the surface of the disc.
eDepending on the disc, etc. it may not be possible to play back
eYou cannot play back unfinalized