Teac SR-L35CD owner manual Programmed Playback, Press the MEMORY/CLOCK ADJ button in the stop mode

Programmed Playback

1 3

2 4

Up to 20 tracks can be programmed in the desired order.

<Shuffle playback does not work during program playback.

<Insert a disc and select “CD” before beginning programming.

1Press the MEMORY/CLOCK ADJ button in the stop mode.

“MEMORY” indicator blinks, and “P-01” appears on the display.

2Within 10 seconds, press the SKIP/SEARCH button to select a track.

<If the SKIP/SEARCH button isn’t pressed within 10 seconds, program mode will be canceled.

3While “MEMORY” is blinking on the display, press the MEMORY/CLOCK ADJUST button.

The track is programmed, and “P-02” is displayed.

Repeat step 2 and 3 to program more tracks.

<You can program up to 20 tracks.

<To cancel the program mode, press the STOP button (H).

4When the selection of track numbers has been finished, press the PLAY/PAUSE button (y/J) to start program playback.

If the PLAY/PAUSE button isn’t pressed within 10 seconds, the MEMORY indicator will go off. In that case, press the MEMORY/CLOCK ADJ button and then press the PLAY/PAUSE button to start program playback.

The programmed contents are kept in memory even after switching from CD mode to TUNER or the unit switches from power on to standby.

12