Clock Adjustment
DISPLAY MEMORY/CLOCK ADJ
.m,/
1Press the DISPLAY button to select clock display.
“:” blinks in the clock display.
<If the unit is in standby mode, press and hold the MEMORY/CLOCK ADJUST button for 2 or more seconds, and continue the procedure from step 3 .
<Press the STOP button to cancel the time setting. (In the TUNER mode, press the DISPLAY button.)
2Within 4 seconds, press and hold the MEMORY/CLOCK ADJUST button for 2 or more seconds.
3Press the .m or ,/ button to select “12H” or “24H”.
<In the TUNER mode, use the TUNING button.
4Press the MEMORY/CLOCK ADJUST button.
If you have selected “12H”, “AM” or “PM” appears on the display.
5Press the .m or ,/ button to set the current hour.
<In the TUNER mode, use the TUNING button.
6Press the MEMORY/CLOCK ADJUST button.
7Press the .m or ,/ button to set the current minute.
<In the TUNER mode, use the TUNING button.
8Press the MEMORY/CLOCK ADJUST button to finish the time setting mode.
The clock starts from 00 second.
<If the unit is disconnected from the power supply for more than 3 minutes, the clock and timer setting will be reset.
<If the unit is disconnected for less than 3 minutes the time displayed may not be correct.
18
