Teac UD-501, USB D/A Converter Display (1), When the POWER is turned ON, When selecting an input source, Input source information display

Display (1)

When the POWER is turned ON

c

After the above messages appear, the input source will be shown on the display.

When selecting an input source

The name of the input source is shown on the display when you change input source.

Example: when OPT2 is selected

Input source name

Error indications

When the unit cannot lock the input signal, an “UNLOCK!” error message blinks on the screen.

Example

Input source information display

During PCM audio input EN

When MODE DISP=OFF

Example

Signal type Sampling frequency

When MODE DISP=ON, UPCONV=OFF, DF=OFF

Example

Upconverter is disabled

Digital ￿lter setting

When MODE DISP=ON, UPCONV=ON, DF=SHARP

Example

Upconverter is enabled

Digital ￿lter setting

When the input signal is locked at 352.8 kHz

Example

ooWhen the input signal is locked at 352.8 kHz or 384 kHz, the upconverter and PCM digital filter are bypassed, so MODE DISP, UPCONV and DF will not be shown regardless of their settings.

11