Settings (3)
Restoring settings to their factory defaults
While pressing and holding the MENU but- ton, set the POWER switch to ON.
ooPress and hold the MENU button until “SETUP CLR” appears on the display. The factory default settings are the setting values shown in the screen images used in the explanations in this manual.
Troubleshooting
If you experience a problem with this unit, please check the following items before requesting service. If it still does not operate correctly, contact the retailer where you purchased the unit or TEAC customer support (see the back cover for contact information).
General
The power will not turn on.
eCheck that the power cord is completely plugged into the power outlet. If the outlet is switched, confirm that the switch is in the ON position.
eConnect a different electrical device to the outlet to confirm that it is supplying power.
eIf the automatic power saving function has caused the unit to enter standby, turn the INPUT knob or press the MENU button to turn the power ON again.
No sound is output.
eIf a stereo amplifier is connected to this unit, adjust its volume.
If you are using headphones connected to this unit, use the PHONES LEVEL knob to adjust the volume.
eUse the INPUT SELECTOR knob to select the input that is connected to the source that you want to hear.
eReconfirm the connections with other equipment.
There is a humming noise.
eIf a connecting cable is near a power cord, fluores- cent light or similar cause of interference, increase the distance between them as much as possible.
18