Tech4o Alti-Ski manual Temperature Mode Display, Temperature Mode Setting, Altimeter Mode Display

8.0 Temperature Mode - Display

•To view temperature mode, press the [m]

button until the mode indicator displays T.

• In temperature mode the watch will display temperatures in the top row and home time, temperature, or run counter in the bottom row.

8.1 Temperature Mode - Setting

•In temperature mode, press and hold the

[s/+] button for 2 seconds. The ˚F or ˚C indicator will flash.

•Press the [o/-] button to select between ˚F or ˚C.

•Press the [o/o] button to confirm selection.

•At this time the bottom row will flash.

•Press the [o/-] button to select between home time, temperature, or run counter to be displayed in the bottom row. Press the [o/o] button to confirm selection.

8.2 Temperature Mode - Temperature Features

Current, Maximum, and Minimum Temperatures:

•In temperature mode, press the [o/-] button to access the

14

maximum temperature reading since the setting was last reset.

•Press the [o/-] button again to access the minimum temperature reading since the setting was last reset.

•Both maximum and minimum temperature readings can be reset by pressing and holding the [s/+] button for 2 seconds while viewing either the maximum or minimum records respectively.

•Surrounding temperatures are generally 10 - 15˚F / 5 - 8˚C

cooler than watch readings due to the effects of the wearer's body temperature.

•For more accurate readings, remove the watch from your wrist and allow 5-10 minutes for sensors to adjust.

9.0 Altimeter Mode - Display

In altitude mode the watch will display altitude and barometric measurements in the top row and the current home time, current temperature, or run counter depending our your personal selection.

• To view Altimeter Mode, press the [m] button until the mode indicator displays A.

15