2 SpeedTouchTM610 Remote Access
ApplicationNote Ed. 01 5
2SpeedTouch

TM610 Remote Access

Introduction The application note SpeedTouchTM610 Operation and Maintenance described some of
the standard access methods the SpeedTouchTM610 provides to allow users to perform
configurations and/or - if needed- the required procedures for maintaining and opti-
mizing SpeedTouchTM610 operation and performance.
While that application note described what tools are provided by the
SpeedTouchTM610 and how to use them via the SpeedTouchTM610’s local interface(s)
(Ethernet and ATMF-25.6Mb/s), this section will describe how you can use the very
same tools via its DSL interface, i.e. from the remote side of the Packet service connec-
tion.
Resumé of
SpeedTouchTM610
access methods
Before going deeper into the specific changes needed to allow certain monitoring or
management, a listing of the methods to access the SpeedTouchTM610 is provided:
•SpeedTouchTM610 web interface access (HTTP/HTML)
•SpeedTouchTM610 CLI access (TCP/IP-Telnet)
•SpeedTouchTM610 FTP access (TCP/IP-FTP).
Note For more information on the SNTP, Syslog and SNMP management tools,
see the respective sections in this application note.