CD Player
EN
Skipping Tracks
Press SKIP BACKWARD or SKIP
FORWARD to skip to the previous or next track on the disc.
Searching Through a CD
Press and hold SKIP BACKWARD or SKIP
FORWARD to search through a CD while it is playing.
Random Playback
Press to turn on/off the playing of tracks in random order. (Remote Only)
Sampling Tracks
Intro Play lets you enjoy the CD tracks for 10 seconds. When the last track has played for 10 seconds, the Intro Play stops.
1.Load a CD into the disc compartment.
2.Press INTRO on the remote control and the INTRO icon will be shown.
3.Press PLAY/PAUSE to start playback from the first track. Press SKIP BACKWARD
or SKIP FORWARD to select a particular track.
4.Press INTRO again to exit intro play.
Setting Up a CD Program
Tips:
A maximum of 20 tracks can be stored into memory.
1.Select CD mode by pressing CD.
2.Press PROG•SET•CLEAR after the CD has been loaded into the system. The message “0 PR 1” will be shown on the display and PROG. flashes.
3.Press SKIP BACKWARD or SKIP FORWARD to select a track to be stored into memory location 1.
4.Press PROG•SET•CLEAR to confirm your selection and store that track into memory. Repeat step 3 and this step to store additional tracks.
In CD program mode, the PROG. icon lights on the display.
Playing a Program List
While in PROGRAM mode, press PLAY/PAUSE . When the unit is playing the program, “PROG” icon will be displayed.
Repeat
•Press REPEAT on the remote control once to repeat all tracks. REPEAT is shown in the display simultaneously.
•Press again to play a particular track repeatedly, at the same time, REPEAT 1 is displayed.
•Press a third time to
7
Deleting Program List
While in PROGRAM mode, press and hold STOP for 3 seconds. The system displays the message
CLEAR.
CS104 EN | 10 | 3/8/04, 1:46 PM |