![Loading a Disc](/images/new-backgrounds/10088/1008819x1.webp)
CD Player
Loading a Disc
1.Press CD to select CD mode.
2.Press down on the OPEN/CLOSE area on the top of the unit to open the CD compartment door.
3.Insert up a disc with the label facing up.
4.Close the CD compartment door.
If the disc is a mp3 CD, the mp3 icon lights on the display. mp3 discs may take a longer time to read. Wait while the unit reads and counts the total number of songs on the disc.
Tips:
If the CD compartment is not loaded with a CD or the CD is unreadable, the message “NO DISC” will be shown.
Track Information
•For normal audio CDs, press DISPLAY on the remote control repeatedly during playback to display track remain time, disc remain time and track elapsed time.
•For mp3 discs, press DISPLAY on the remote control during playback repeatedly to display the following song information.
•FILE name
•FOLDER name
•TITLE
•ARTIST
•ALBUM
•GENRE
•YEAR
•BIT RATE
The selected song information type shows briefly on the display (e.g. FILE), then the detailed information scrolls along the display.
FILE<0123>FILENAME,mp3 “0123” indicates the file number of the current track on the disc.
EN
Playback
•Press PLAY/PAUSE to begin or pause playback.
•Press STOP to stop play.
See Troubleshooting Tips for mp3 playback sequence details.
Note:
The display continues to show the selected display mode until another selection is activated.
Skipping Tracks
Press SKIP BACKWARD or SKIP
FORWARD to skip to the previous or next track on the disc.
Searching Through a CD
Press and hold SKIP BACKWARD or SKIP
FORWARD to search through a CD while it is playing.
Selecting Folders (mp3 CDs Only)
•Press PRESET / FOLDER - to go to the previous
•Press PRESET / FOLDER + to go to the next
8
CS140 EN | 11 | 4/14/04, 3:38 PM |