CD Player
EN Random Playback
Press 
to turn on/off the playing of tracks in random order. (Remote Only)
Sampling Tracks
Intro Play lets you enjoy the CD tracks for 10 seconds. When the last track has played for 10 seconds, the Intro Play stops.
1.Load a CD into the disc compartment.
2.Press INTRO on the remote control and the INTRO icon will be shown.
3.Press PLAY/PAUSE 
to start playback from the first track. Press SKIP BACKWARD 
or SKIP FORWARD 
to select a particular track.
4.Press INTRO again to exit intro play.
Repeat
•Press REPEAT on the remote control once to repeat all tracks. REPEAT ALL is shown in the display simultaneously.
•Press again to play a particular track repeatedly, at the same time, REPEAT 1 is displayed.
•Press a third time to
Setting Up a CD Program
Tips:
A maximum of 20 tracks can be stored into memory.
9 
1.Select CD mode by pressing CD.
2.In stop mode, press PROG•SET•CLEAR after the CD has been loaded into the system. The message “0 Pr01” will be shown on the display.
3.Press SKIP BACKWARD 
or SKIP
FORWARD 
to select a track to be stored into memory location 1.
4.Press PROG•SET•CLEAR to confirm your selection and store that track into memory. The next available memory locations shows on the display. Repeat step 3 and this step to store additional tracks.
In CD program mode, the PROG. icon lights on the display.
Playing a Program List
While in PROGRAM mode, press PLAY/PAUSE 
. When the unit is playing the program, “PROG” icon will be displayed.
View and Edit Program List
1.Press PROG•SET•CLEAR repeatedly to view program list.
To edit program location, press PROG•SET•CLEAR until the location you want to edit is displayed.
2.Press SKIP BACKWARD 
or SKIP
FORWARD 
to select the new track to be stored.
3.Press PROG•SET•CLEAR to confirm.
Deleting Program List
Press and hold PROG•SET•CLEAR for 2 seconds to clear program list. The program list will also be cleared once the CD compartment door is opened. The system displays the message CLEAR briefly.
CS140 EN | 12 | 4/14/04, 3:38 PM |
