Technicolor - Thomson CS300 Display Showing the Demonstration, Display Clock / Timer, Sleep Mode

CS300 EN 11/20/02 10:19 AM Page 9

Display Settings

Display

Showing the Demonstration

Operational in standby mode only. Press DEMO on the main unit to turn on/off demonstration mode. The demonstration scrolls through all display operations.

Display Clock / Timer

Setting the Clock

1.Press and hold CLOCK to enter clock setting mode. The hour flashes on the display.

2.Press PRESET DOWN or PRESET UP on the main

unit or PRESET - or PRESET + on the remote control to set the hour . Press CLOCK to shift to minute digits.

3.Press PRESET DOWN or PRESET UP on the main unit or PRESET - or PRESET + on the remote control to set the minute .

4.Press PROG•SET to save settings.

Note:

•Press CLOCK once to display the current time for about 8 seconds.

EN

4.Press TIMER to shift to set timer off time.

5.OFF TIME will show briefly then the hour digit will flash. Repeat steps 2 and 3 to set the hour and minute.

6.Press TIMER to move on to source selection.

7.Press PRESET DOWN or PRESET UP on the main

unit or PRESET - or PRESET + on the

remote control to select source (CD / Tuner / Tape

/Rec TU)

8.If CD is selected as source, press PRESET DN or UP to select disc; if Tuner or Tuner REC. are select -ed , press PRESET DN or UP to select the preset station,press TIMER again to select vol ume.

9.Press PRESER DN or UP to select volume level

10.Press PROG.SET to save setting..

Note: Timer will turn on at the last volume level.

Activating the Timer

Press and release TIMER to turn on/off the timer. The TIMER indicator will lit.

Setting the Timer

1.Press and hold TIMER to enter timer setting mode. ON TIME will should briefly, then the hour digit will flash on the display.

2.Press PRESET DOWN or PRESET UP on the main

unit or PRESET - or PRESET + on the

remote control to set the hour . Press TIMER to shift to minute digits.

3.Press PRESET DOWN or PRESET UPon the main unit or PRESET - or PRESET + on the remote control to set the minute .

Adjusting Display Brightness

Press and hold DIM/DEMO to adjust display brightness.

Sleep Mode

You can select the time interval in minutes before the unit turns off automatically.

1.Press SLEEP to enter sleep setting mode. SLEEP 00 will show on the display.

2.Press and hold SLEEP to select the desired sleep time (00, 90, 80, 70, 60, 50, 40, 30, 20, 10, 00).Press SLEEP to check the remaining sleep time.

5