CS600 EN 5/3/05 4:17 PM Page 16
Settings
Settings
EN Showing Demonstration
Press DEMO to turn on/off demonstration mode. The demonstration scrolls through all display operations.
Setting the Clock
1.Press and hold CLOCK on the remote control until the hour flashes on the display.
2.Press SKIP BACKWARD 
or SKIP
FORWARD 
to set the hour and then press CLOCK to shift to minute digits.
3.Press SKIP BACKWARD 
or SKIP
FORWARD 
to set the minute.
4.Press CLOCK to save settings and STOP 
to quit setting.
3.Press SKIP BACKWARD 
or SKIP
FORWARD 
to set the minute.
4.Press TIMER to change to Timer Off setting with clock time flashing. Repeat steps 2 & 3 for timer off time setting.
Timer
On 00:00A
Off 00:00P
5.Press TIMER to select source. Press SKIP
BACKWARD 
or SKIP FORWARD 
to select TUNER / TUNER REC / DISC / UDISC (USB) / CARD.
Sleep Mode
You can select the time interval in minutes before the unit turns off automatically.
Press SLEEP to select among OFF, 120, 90, 60, 45, 30, 15 and 5 minutes.
The SLEEP icon lights on the display when sleep mode is activated.
View Remaining Sleep Time
When sleep is activated, press SLEEP once to view remaining sleep time.
Adjust Sleep Time | EN |
Press SLEEP again when the remaining sleep time is displayed to change sleep time.
Note:
Sleep is automatically
Note:
When system is ON, you can press CLOCK to display the current time for about 2 seconds.
Setting the Timer
Timer
Source
Tuner
If TUNER REC is selected, press SKIP
BACKWARD 
or SKIP FORWARD to select the preset station.
6.Press TIMER to set volume. Adjust VOLUME CONTROL to select desired volume level.
Sound Features
Volume Control | Using Preset Equalizer Curves | ||
Rotate the volume control on the main unit or | Press EQ to toggle among FLAT, ROCK, POP, JAZZ, | ||
CLASSIC and CUSTOM. The display shows your | |||
press VOL or | on the remote control to | ||
selection briefly and the relative icon lights on | |||
adjust volume level. The volume level shows | |||
| |||
briefly on the display. | the display. |
|
1.Press and hold TIMER on the remote control until Timer On and the clock hour flashes on the display.
Timer
On 00:00A
2.For setting time, press SKIP BACKWARD 
or SKIP FORWARD 
to set the hour and then press TIMER to shift to minute digits.
Timer
Volume
10
7.Press TIMER to save settings.
Press STOP 
to quit setting.
The timer is automatically activated once timer setting is saved.
Activating the Timer
Press and release TIMER to turn on/off the alarm.
The timer icon 
is displayed when timer is activated.
Bass Boost
Press B.BOOST to turn on/off boosting the bass frequency. The BASS BOOST icon lights on the display when it is activated.
Muting Audio
Press 
MUTE on the remote to cut the sound (Remote Only). MUTE flashes on the display.
Creating a Custom Curve
1.Press EQ to select CUSTOM mode.
2.While CUSTOM is displayed, press SKIP
BACKWARD 
or SKIP FORWARD 
to cycle among displayed bass and treble range levels.
3.While BAS and TRE is displayed, adjust volume control to set the associated gain between
4.Press EQ to exit.
BAS +2
TRE 00
Custom
9 |
|
|
| 10 |
|
|
|
|
|
