EN
EN
Satellite set-up
15

DMR / satellite or cable receiver settings

1. Switch on your TVset, your DMR, then your satellite or cable receiver.
2. Place the receiver on channel 002.
With your DMR’s remote control, carry out the following settings:
3. If the main menu is not displayed, press the
menu
key on the remote control.
4. Select the Setup line using theˆor , keys, and press
ok
to validate.
5. Select the Installation line using theˆor , keys, and press
ok
to validate.
ðThe Interactive setup line is already selected. Press
ok
.

Display language and country of residence

6. Choose a display language for the following screens.
7. Select your country of residence using theˆor , keys, and press
ok
.
ðThe Automatic line is already highlighted, press
ok
.
ðThe screen which appears is a set-up screen for the allocation of input terminals.
8. If you connected your devices as indicated on page 14, check that Satellite Receiver
has been allocated to AV2-SAT-CABL, otherwise change the allocation using the key.
9. Then select the line Done and press
ok
.
ðAn installation window will appear. Ablue cursor shows the progress in the set-up of the
channels. When all the channels that you can receive in your area have been stored,
100 % is indicated.
Press
ok
.
ðFrom now on, follow on-screen instructions appearing inthe various windows. If need be, refer to the additionalexplanations given below.
Cable Receiver
or
Satellite Receiver
:
to connect with a satellite or cable receiver
terminal on the AV2 socket of your DMR
(connection shown on page 14). The other
settings are explained on page 10.
DTH7000-EN 23/08/02 10:24 Page 15