Technicolor - Thomson DVD Player + TV Set + VCR manual Advanced functions, Language selection

EN

VCR

Advanced functions

Language selection

To change the language of the VCR menus, please refer to the Language menu of the DVD player on page 31.

Auto tracking

The video recorder automatically adjusts the tracking to provide the best picture quality.The message A.TRACKING is displayed when this function is in operation.

If the quality of the recording is poor, repeatedly press the and buttons on the remote control to manually adjust the tracking until all distortions have been removed. Press the 0 button on the remote control to restore the standard setting.

Setting the clock

The video recorder uses a 24 hour clock.To enter a single digit number, first press the 0 button (e.g. 01 for 1).

AUTO ADJUST : ON

- -

1 2

TIME	OK i
DATE

	HH	MN	DD	MM	YY
	- - : - -		- - . - - . - -			- - -
1	2
TIME						i
DATE

1. Press to access the main menu. Use the and

buttons to select TIME DATE TIME1 2 then press OK.

DATE

2.To set the clock manually, set the AUTO ADJUST function on OFF using and . Press OK to adjust the date and time.

3.Use the numbered buttons on the remote control to enter the HH (hours), MN (minutes), DD (day), MM (month) and YY (year).The day of the week is automatically displayed once the date has been entered. If you make a mistake use and to select the item and re-enter the details.

4.When you are finished, press to store your settings. The new time is displayed on the front display.

Note: If Auto Adjust is on and the signal is sufficiently strong, the clock settings will be automatically checked against teletext and adjusted as necessary.

Colour standards

The video recorder comes with an automatic colour standard detection system.When playing a tape causes problems (scrambled pictures or black and white), you must force the play mode by selecting one of the available options (PAL, SECAM, MESECAM).

If you wish to record a tape in a particular colour standard, choose one of the displayed options.

AUTO

PAL	SYS-
SECAM	TEM
MESECAM	i

1.Press to access the main menu.

2.Use and to select SYSTEM SYSTEM- then press OK.

3.Use and to select a colour system.

4.Press and to select RF AUDIO.

5.Use and to select I/I, B/G or D/K.

6.Press to exit the menus.

18