Technicolor - Thomson DVD Player + TV Set + VCR manual Back panel audio sockets

Connections and Setup

DVD/VCR AUDIO R	DVD EXCLUSIVE
and L sockets	AUDIO R and L
	sockets
	Audio cables (red
	and white)

Coaxial cable	Coaxial digital
	audio output

Optical cable	Optical digital audio
	output

EN

Back of

DVD/VCR

Back panel audio sockets

DVD/VCR AUDIO OUT L (left) and R (right) sockets - DVD EXCLUSIVE AUDIO OUT L (left) and R (right) sockets

These are analogue audio output sockets.The AUDIO L socket and cable are white, while the AUDIO R socket and cable are red. Connect the DVD/VCR AUDIO L and R sockets to the television set’s AUDIO L and R sockets using audio cables (not provided).

Note: If your television set only has one audio socket connect it to the DVD player’s left socket (white).

The DVD exclusive sockets are dedicated to the DVD player and offer a higher level of sound quality than the DVD/VCR ones.

Coaxial digital audio output (COAXIAL) /

Optical digital audio output (OPTICAL)

These sockets offer a higher level of sound quality compared to that provided using an analogue audio connection. Use one of these sockets to connect your DVD Player to an amplifier equipped with two-channel digital stereo (PCM) or to an Audio/Video receiver equipped with a multi-channel decoder (Dolby Digital, MPEG 2 or DTS) using a digital coaxial or optical cable (not supplied).

Video cable	DVD/VCR VIDEO
	OUT socket

Back panel video sockets

DVD/VCR VIDEO OUT socket

This socket (yellow) is also known as a composite video socket. The video cable (not supplied) usually comes with two audio cables (black and white). The picture quality obtained using a video connection is poorer compared to that obtained using a Scart connection.

Note: Remember to connect the audio cables because the video cable carries only the picture signal, not the sound.

7