Advanced functions
14
EN
Setting the time The Time menu allows you to set the time and date on your TV set,to programme an
automatic turn-off or wake-up timer and to view the calendar.
Display the OVERVIEWmenu by pressing the MENU button. Select the Time option
and press OK to confirm.
Setting the time and date
1. Select the Time referenceoption.
2. Select a channel which displays Teletext so that the time and date from this can be used
as a reference,by using the buttons or entering a channel number using the
numeric buttons on the remote control.The time and date appear in a couple of
seconds if they are available on the channel that has been selected.
3. If the time and date are not supplied by Teletext they will not appear under the Time
and Date options.You will then have to enter them manually.
Select the Time option and enter the time using the numeric buttons or the
buttons.The setting -- appears under the Time reference option.
Select the Date option and enter the date using the numeric buttons in the format:
DD/MM/YY.
Notes:
- In the event of the power supply being cut off (the TV set is unplugged or there is an electrical
fault),the time and date will be lost, if they have been entered manually.You need to enter
them again.In this instance, we advise you to consult a channel which has this information and
to check that it is correct.
- If the time has not been set,when you select the Time option from the OVERVIEW,a
message appears prompting you to set the time.
Using the calendar
This menu allows you to look for a particular date.
1. Select the Calendar option and press OK to confirm.The Calendar screen
appears.
2. Under Month select the month you want from the list using the buttons.
3. Under Yearselect the year you want from the list using the buttons.
The calendar displays the selected month.
To display the calendar for the current month, select the Todayoption and press OK to
confirm.The current day is automatically selected if the date is available.
Programming a turn-off timer
You can programme the TV set’s turn-off timer by setting a period of time after which or a
specific time when the TV set goes into standby mode.
To set a period of time after which the TV set goes into standby mode:
1. Select the Sleep timer option.
2. Using the buttons,set the period after which the TV set automatically goes into
standby mode (4 hours maximum,at 5-minute intervals). To disable this function,select
Off.
Note:You can access this function directly by pressing the SLEEPbutton on your remote
control.
To select a time for the TV set to go into standby:
1. Select the Turn off timeroption.
2. Using the buttons,choose Once or Daily from the list.Select Off to disable
this function.
3. Select the Turn off timeoption. Using the numeric buttons or buttons,enter
the time at which you want the TV set to go into standby mode.
When one of these functions (Sleep timer or Turn off timer) is on,a message appears one
minute before the television set goes into standby mode.Press any button on the remote
control to cancel standby mode.
Press EXIT to close the menu.To return to the previous menu,select Return and press
OK to confirm.
Time
Return
Sleep timer Off
Time reference 04 BBC4
Time 12:34
Date 01/06/05
Calendar ...
Wake up timer Once
Wake up time 07:00
Wake up channel 10 CNN
Turn off timer Once
Turn off time 12:00
Calendar
Return
Month September
Year 2005
Today ...
Mon Tue Wed Thu Fri Sat Sun
1234
567891011
12 13 14 15 16 17 18
19 20 21 22 23 24 25
26 27 28 29 30
IFC230_EN 3/01/06 11:19 Page 14