8
General operation
EN

Switching the TV set on and off

To s witch the TV set on:
- press the button on the side of the TV set,the
or OK on the remote control to switch the television on at
the last channel or AV programme you were watching,
- press the TV or PR+/PR- buttons to switch the television
on at the last channel you were watching,
- press any numeric button to switch the television on at the
corresponding channel,
- press the AV button to switch the television on at the last
AV programme you were watching.
To put the TV set into standby mode, press the
button on the side of the TV set or the button on the
remote control.The TV set remains powered up,but with low
energy consumption.
To s witch off the TV set, unplug the mains socket from the
mains outlet.

Accessing channels

Using the numeric buttons:
for channels 1 to 9,press the corresponding numeric button;
for channels 10 to 99,
- press the tens digit for a few seconds to display it on the
screen,then press the units digit. For instance, for
programme 24,press and hold 2to display 2-,then press
4;or
- press the 0/-- button to display “--”,then enter the two
digits.
Using the PR+/PR- buttons:scroll through the channels.AV
programmes are not included in the cycle unless you use the
buttons on the side of the TV set.
Using the list of programmes:refer to page 9.
To access the channel or AV programme previously being watched,
press the RETURN button.

Accessing your favourite channels

You can define the channels you watch most often as your
favourite channels.This will allow you to create your own list of
channels which you can access more quickly using the PR+/PR-
buttons on the remote control.
1. Follow the procedure described in point 5 on page 6 for
defining a channel as your favourite channel.
2. Press the PRESETS (red) button on the remote control.
3. Select the PR+/PR- keys option.Use the buttons to
select Favourites.
When you change channels using the PR+/PR- buttons on the
remote control only your favourite channels will be available.
To cancel this option, select All channels under the PR+/PR-
keys option.
Note:The PRbuttons on the TV set allow you to access all
the channels set up,even if the Favourites option is selected

Accessing AV programmes

Press the AV button to display the last selected audio-visual
programme and scan through the other audio-visual programmes.
AV selection loop: AV1,AV2,AV3,CMP (= component,YPrPb or
YCrCb),VGA,HDMI.

Volume

Volume control:use the ¦VOL buttons on the side of the
TV set or press the +/- buttons on the remote control to
increase or decrease the volume.
Sound mute:press the button to temporarily mute the
sound.Press this button again or the +button to restore
it.
Headphone volume control:press the +/-buttons on the
remote control to display the volume control bar.Then use the
buttons to switch to the headphone volume control bar.
Use the +/- buttons to adjust the volume.

Displaying status information

In TV mode you can press the INFO(yellow) button on the
remote control to display the number and name of the
relevant channel,the time and date, the type of sound and
format or zoom.If the sleep or turn-off timer is set the time
remaining until the TV set is switched into stand by is
displayed.
In PC mode you can press the INFO(yellow) button on the
remote control to display the time and date,the type of
format,as well as the source of the signal being received and
the resolution.If the sleep or turn-off timer is set the time
remaining until the TV set is switched into stand by is
displayed.
When you switch the TV set on,change channels or exit Teletext,
the channel’s number and name are displayed.
Note:If you activate the Channel number function in the
Preferencesmenu, the channel number will be displayed
permanently (see page 17).
IFC230_EN 3/01/06 11:19 Page 8