10
Advanced functions
EN
Adjusting the sound Display the OVERVIEWmenu by pressing the MENU button. Select the Sound
option and press OK to confirm.The Sound menu appears with the following options:
Tone control:this option gives you access to the Tone control menu (more details
below).
Sound type:select a sound type from the list using the buttons.
The default sound type is Automatic for mono sources,Stereo for stereo sources and
Stereo for AV sources.
Note:The options offered depend on the programme you’re watching.Refer to the table 1
opposite.
Sound mode:use the buttons to choose a mode from the list.SRS
TruSurroundXTis the default mode.
Notes:
- The options available depend on the sound type selected.Refer to the table 2 opposite.
- SRS TruSurroundXTmode reproduces virtually on two channels only the sound from a
multi-channel source and enhances the rendition of dialogue and bass.
- SRS TruSurroundmode reproduces virtually on two channels only the sound from a
multi-channel source.
- SRS WOWmode can be used to obtain optimum bass reproduction
SRS Dialog Clarity:this function boosts the central channel to make dialogue easier to
understand.You can use the buttons to adjust it.
Note:This option only appears if you have selected SRS TruSurroundXTunder the
Sound mode option.
Balance:use the buttons to balance the sound between the left and right speakers.
SRS TruBass:this function is used to strengthen the bass.Select an option from the list
using the buttons.
Auto Volume Level:check the box by pressing the OKbutton, if you want to keep the
same sound level for all channels.
Sound effect:this function allows you to create sound effects.Select an option from the
list using the buttons.
Internal speakers:uncheck this box by pressing OKif you want to stop the sound
coming from the internal speakers and connect external speakers to the TV set.
If you unplug these external speakers,remember to check the box to reactivate the TV
set’s internal speakers (otherwise you will not get any sound).
Headphone:this option allows access to the headphone setting menu (see further
below).
Press EXIT to close the menu.Select Return and press OK to return to the
OVERVIEWmenu.
Tone control
Select the Tone controloption from the Sound menu and press OK to display the
menu.The content of this menu depends on the options you have selected under Sound
mode and Sound effect in the Sound menu.
If you have not selected any effect under Sound effect,the menu which is displayed
allows you to select a predefined setting and choose your own settings using the graphic
equaliser.It offers the following options:
Sound preset:use the buttons to select the appropriate setting for the
programme you are watching.
The Personalsetting stores your graphic equaliser settings.
Note:The Sound preset option is not available if you have selected a sound effect under the
Sound effect option.
You can access the list of preset sound settings directly by pressing the PRESETSbutton
(red) on the remote control,selecting the Sound preset option and choosing one of the
preset settings from the list.Your selection is applied to all channels and AV programmes.
Press EXIT or PRESETS to close the menu.
Sound
Return
Tone control ...
Sound type Stereo...
Sound mode Normal...
SRS Dialog Clarity
Balance
SRS TruBass Maximum...
Auto Volume Level
Sound effect Off
Internal speakers
Headphone ...
Broadcast
Mono
Stereo
Dual
NICAM - 3
Analog AV
Sound types
Automatic - Mono
Mono - Stereo
Sound 1 - Sound 2
Sound 1 - Sound 2 - Sound 3
Stereo - Sound 1 - Sound 2
Sound type
Automatic
Mono - Sound 1
Sound 2 - Sound 3
Stereo
Sound modes
Normal - Wide - SRS
TruSurroundXT
SRS TruSurround - SRS WOW
Normal - Stereo wide
TruSurroundXT
SRS TruSurround - SRS WOW
Tone control
Return
Sound preset Film...
Frequency range 12 kHz...
1
2
IFC230_EN 3/01/06 11:19 Page 10